High Frequency PCB Made on TLY-5 | Taconic TLY-5 RF PCB
Hi,
Good day. Hopefully this email finds you well.
TLY-5 PCBs are manufactured with very lightweight woven fiberglass and are much more dimensionally stable than chopped fiber reinforced PTFE PCBs. The woven matrix yields a more mechanically stability that is suitable for high volume manufacturing. The low dissipation factor enables successful deployment for automotive radar applications designed at 77 GHz as well as other antennas in millimeter wave frequencies.
Our PCB Capability (TLY-5)
| PCB Material: | Lightweight Woven Fiberglass |
| Designation: | TLY-5 |
| Dielectric Constant: | 2.2 |
| Dissipation Factor | 0.0009 10GHz |
| Layer Count: | Double Sided PCB, Multilayer PCB, Hybrid PCB |
| Copper Weight: | 1oz (35µm), 2oz (70µm) |
| Laminate Thickness: | 10mil (0.254mm), 20mil (0.508mm), 30mil (0.762mm), 60mil (1.524mm) |
| PCB Size: | ≤400mm X 500mm |
| Solder Mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface Finish: | Bare copper, HASL, ENIG, Immersion silver, Immersion tin, OSP, Pure gold plated etc.. |
Typical Applications:
1. Automotive Radar
2. Satellite/Cellular Communications
3. Power Amplifiers
4. LNBs, LNAs, LNCs
5. Aerospace
6. Ka, E and W band Applications
We can provide you with prototype, small batches and mass production service. If you are interested in the high frequency PCB made on TLY-5, we are willing to share our price with you.
Thanks for your time to check this e-mail and hope to hearing from you soon.
Best regards
Ivy Deng | Business development
Bicheng PCB | website: www.rfpcb-board.com | Material partners: Rogers, Taconic, ITEQ, SHENGYI, KB, TAIYO, KUANGSHUN
If you do not want to receive emails from Bicheng about marketing communications and special offers, reply as "remove" in the subject line.
Bicheng is located at Baoan, Shenzhen, China 518103.
